FC200 Series COMPACT LOW COST FREQUENCY CONVERTERS

Model : FC200 Series

Q'ty :

The FC200 Series frequency and voltage converters are economically priced and offer top of the line performance.

The series consists of two 1 phase output instruments in size of 500VA and 1000VA. The converters allow the user to duplicate a utility grid of either 50, 60 or 400 Hertz for export product testing or operation of imported equipment.

For questions regarding the FC200 Series, please contact us.

The FC200 Series frequency and voltage converters are easy to use instruments which provide reliable frequency and voltage conversion. The frequency can be adjusted to 400 Hertz for applications such as the testing of military/avionics equipment or for the operation of 400 Hertz electronics that are onboard an aircraft or a military vessel. The adjustable frequency band of 45 to 500 Hertz in conjunction with the dual voltage ranges of 0-150 volts or 0-300 volts provides full capabilities for testing and operating electronics worldwide.

Setup and operation of the FC200 Series is exceptionally easy. The simple front panel layout allows users to continuously vary voltage and frequency or to select preset standard frequency settings. Individual meter displays provide digital readouts for frequency, voltage, current and power or power factor.

The FC200 Series converters are a simple and cost effective solution for all of your lower power AC power conversion needs!

Model		FC205	FC210
INPUT SPECIFICATIONS
Input Phase		1-phase / 2-wire + Ground
Input Voltage		115/230Vac ± 15%
OUTPUT SPECIFICATIONS
Power Rating		500VA	1000VA
Max Arms @ 0-150V		4.2 A	8.4 A
Max Arms @ 0-300V		2.1 A	4.2 A
Phase		1-phase / 2-wire + Ground
Voltage	Low Range	0-150V
	High Range	0-300V
	Resolution	0.1V
	Accuracy	± (0.5% of setting+0.2V)
Frequency	Range	45 – 500Hz
	Resolution	0.1Hz at 45 – 99.9Hz, 1Hz at 100 – 500Hz
	Accuracy	± 0.2%
Harmonic Distortion		≤ 0.5% (Resistive Load)
Crest Factor		≥ 4 to 1
Load Regulation		± 0.5% (Resistive Load)
Protection		Over-Current, Short-Circuit, Over-Temperature
Operating Temperature		32°F – 104°F (0°C – 40°C), 80% Relative Humidity
Altitude		Below 6500 feet
DISPLAY & CONTROLS
4 Digital LED meters		Frequency, Voltage, Current, Power or Power Factor (simultaneously)
Memory (Standard)		3 Memories, 3 Programmable Parameters per Memory for: Voltage, Frequency, Current Limit
Calibration		Front Panel Calibration
PLC Interface	Optional	PLC I/O Option (Increases memory location to 7)
REGULATORY COMPLIANCE
Approvals		CE Mark
MECHANICAL SPECIFICATIONS
Dimensions (In/mm)	(H x D x W)	3.5″ x 16″ x 17″ 89 x 400 x 430 mm	3.5″ x 22″ x 17″ 89 x 560 x 430 mm
Weight	(kg/lbs)	22/48	37/81

Programmable Voltage, Dual Range
Programmable Frequency
Current Limit Protection
Simple Front Panel Controls
Measurement readout for Frequency, Voltage, Current and Power all at once
Low Voltage Distortion
High Crest Factor and Peak Current Capability
Up to 0-300 VAC Direct Coupled Out
45-500 Hz Full Power Bandwidth
PLC Interface Option available
CE Mark

AC Test Power

The FC200 Series Power Source is equipped with a powerful microcontroller to create a stable and accurate output frequency, regardless of AC input conditions. It can be programmed to supply a variety of power conditions to the device under test and meters all output parameters.

Frequency/Voltage Conversion

The FC200 Series is an excellent source of stable AC voltage over a frequency range of 45 to 500 Hz. The output frequency is quartz-crystal stabilized. Output voltages up to 300 VAC are provided.

Export/Import Product Development and Test

With the ability to provide any single phase voltage and frequency combination found around the world, the FC200 Series is a great choice for evaluating AC power input supplies for worldwide use.

Avionics Power

Whenever 400Hz, 115Vac single phase is required to power up shipboard or airborne equipment, the FC200 can do the job. With up to 8.4 A of current available, most single phase input equipment can be powered up for repair or test purposes.