The CFS100 Series programmable AC or DC output power sources are cost effective source of power for development, test and production applications requiring anywhere from 800VA or less to 4000VA of single phase AC or DC output.
This series consists of three models, CFS108, CFS116 and CFS140. All models share a modern PWM switch mode design for optimal performance and efficiency. These units are excellent source for 50, 60 or 400 Hertz for export product testing as well as testing DC powered equipment.
For questions regarding the CFS100 Series, please contact us.
The CSF100 Series programmable AC and DC output power sources are easy to use instruments which provide precisely controlled frequency and voltage conversion. The frequency can be adjusted from 40 to 500 Hertz for applications such as the testing of military/avionics equipment or for the operation of 400 Hertz electronics that are onboard an aircraft or a military vessel. The adjustable frequency band in conjunction with the dual voltage ranges of 0-150 volt or 0-300 volt as well as DC test capability provides full capabilities for testing and operating electronics deployed worldwide.
Setup and operation of the CFS100 Series is easy. The large LCD display and simple front panel controls allows users to vary voltage and frequency using the shuttle or by entering a value directly using the decimal keypad. The LCD displays readouts for frequency, voltage, current, peak current, crest factor, power, apparent power and power factor.
The CFS100 Series power sources are a reliable and cost effective solutions for all of your single phase AC power and DC power needs!
|
Model
|
|
CFS108
|
CFS116
|
CFS140
|
INPUT SPECIFICATIONS
|
|
Input Phase
|
|
1-phase / 2-wire + Ground
|
|
Input Voltage
|
|
115/230Vac ± 10%
|
208V or 230Vac ± 10%
|
OUTPUT SPECIFICATIONS – AC MODE
|
|
Power Rating
|
|
800VA
|
1600VA
|
4000VA
|
|
Max Arms 150V Range
|
|
9.2 A
|
18.4 A
|
36.8 A
|
|
Max Arms 300V Range
|
|
4.6 A
|
9.2 A
|
18.4 A
|
|
Phase
|
|
1-phase / 2-wire + Ground
|
|
Voltage
|
Low Range
|
5-150V
|
|
|
High Range
|
5-300V
|
|
|
Resolution
|
0.1V
|
|
|
Accuracy
|
± (0.2% of setting+0.3V)
|
|
Frequency
|
Range
|
40 – 500Hz
|
|
|
Resolution
|
0.1Hz
|
|
|
Accuracy
|
± 0.1Hz
|
|
Harmonic Distortion
|
|
≤ 1.0% (Resistive Load)
|
|
Crest Factor
|
|
≥ 3 to 1
|
|
Load Regulation
|
|
±(1.0% + 1.0V) (Resistive Load)
|
|
OUTPUT SPECIFICATIONS – DC MODE
|
|
Power Rating
|
|
400 W
|
800 W
|
2000 W
|
|
Max Adc 200V Range
|
|
4.6 Adc
|
9.2 Adc
|
18.4 Adc
|
|
Max Adc 400V Range
|
|
2.3 Adc
|
4.6 Adc
|
9.2 Adc
|
|
Voltage
|
Low Range
|
5-200 Vdc
|
|
|
High Range
|
5-400 Vdc
|
|
Accuracy
|
Voltage
|
±(0.2$ setting + 0.3V)
|
|
Ripple & Noise
|
Low Range
|
< 450 mV
|
< 500 mV
|
< 900 mV
|
|
|
High Range
|
< 700 mV
|
< 800 mV
|
< 1.5 V
|
|
COMMON SPECS
|
|
Protection
|
|
Over-Current, Over-Power, Short-Circuit, Over-Temperature
|
|
Operating Temperature
|
|
32°F – 104°F (0°C – 40°C), 80% Relative Humidity
|
|
Altitude
|
|
Below 6500 feet
|
DISPLAY & CONTROLS
|
|
LCD Display
|
|
Frequency, Voltage, Current, Power or Power Factor (simultaneously)
|
|
Memory (Standard)
|
|
50 Memories, 9 Steps per Memory for:
Voltage, Frequency, Current Limit, Test Limits
|
|
Calibration
|
|
Front Panel Calibration
|
|
Interface
|
Standard
|
USB and RS232
|
|
|
Optional
|
Ethernet (LAN)
|
REGULATORY COMPLIANCE
|
|
Approvals
|
|
CE Mark
|
MECHANICAL SPECIFICATIONS
|
|
Dimensions (In/mm)
|
(W x H x D)
|
17″ x 3.5″ x 16″
432 x 89 x 406 mm
|
3.5″ x 20″ x 17″
432 x 89 x 508 mm
|
8.75′ x 20″ x 17″
432 x 222 x 508 mm
|
|
Weight
|
(kg/lbs)
|
19/42
|
30.8/68
|
64.8/143
|
Programmable AC or DC Voltage, Dual Range
Programmable Frequency
Current and Power Limit Protection
Intuitive Front Panel Operation
Measurement readouts for Frequency, Voltage, Current, Peak Current, Current Crest Factor, Power, Apparent Power and Power Factor all at once
Low Voltage Distortion
High Crest Factor and Peak Current Capability
Up to 0-300 VAC Direct Coupled Out
Up to 400VDC output
40-500 Hz Full Power Bandwidth
USB & RS232 Interfaces Standard
LAN Option
CE Mark
AC or DC Test Power
The CFS100 Series Power Sources are equipped with a powerful microcontroller to create a stable and accurate output, regardless of AC input line conditions. It can be programmed to supply a variety of AC or DC power conditions to the device under test and meters all output parameters.
Frequency/Voltage Conversion
The CFS100 Series is an excellent source of stable AC voltage over a frequency range of 40 to 500 Hz. The output frequency is quartz-crystal stabilized. Output voltages up to 300 VAC are provided.
Export/Import Product Development and Test
With the ability to provide any single phase voltage and frequency combination found around the world, the CFS100 Series is a great choice for evaluating AC power input supplies for worldwide use.
DC Testing
The CFS100 Series includes a DC output mode that allows for development or testing of DC powered products up to 400 Vdc. Current and power limit are available in DC mode as well.
Avionics Power
Whenever 400Hz, 115Vac single phase is required to power up shipboard or airborne equipment, the CFS100 can do the job. With up to 38.6 A of current available (Model CFS140), most single phase input equipment can be powered up for repair or test purposes.
>
Products » PPST » APS » AC & AC Sources »
CFS100 Series SINGLE PHASE PROGRAMMABLE AC AND DC POWER SOURCES
