MPG 200S21 - Standalone Micropulse Generator with built-in Battery Switch
 

 The MPG 200S21 includes everything necessary to conduct fully compliant tests following JASO Specification D001-94 for pulses E1 and E2 for 24V system.
An electronic battery switch is built-in in order to interrupt the DC supply voltage as required by the standards. It is a standalone tester including a 60 V/50 A DC coupling/decoupling network but still it can be integrated easily into a complete test system.
Operation is both manual and by software via GPIB or USB. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. A warning lamp control contact and a safety interlock is provided.

Pre-programmed Standard Test routines allow highest user convenience. Still the MPG 200S21 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

• Standalone test generator

• Covers JASO D 001-94

• Test pulses E1, E2

• Built-in electronic battery switch

• Built-in CDN 60 V/50 A DC

• Front panel operation

• Standard Test routines

• USB and GPIB interfaces

Waveshape parameter

Vp : Maximum transient voltage
t1 : Pulse repetition time
t2 : Battery switch off time
E1 : Battery supply voltage
tau: Decaying time constant RC. Time required until the voltage decays to 36.8% of the maximum value