The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50ohm and a 1,000ohm load at the 50ohm coaxial HV output as well into 50ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines.

• Calibration kit as per IEC 61000-4-4

• Also used as per ISO 7637, Annex D

• 50ohm load resistor included

• 1,000ohm load resistor included

• Adapters provided to adapt the load resistors to the output of the coupling network for easy measurement

KW50

Measuring example using the KW 50

Open circuit voltage setting at the EFT/burst generator 
(50ohm output): 2,000V

Resulting output voltage across the 50ohm matching resistor: 1,000V. 

Measuring voltage Vm: 10V

Measured voltage considering the 50ohm input impedance of the oscilloscope: 5V

Resulting attenuation (theoretical): 400:1

KW1000

Measuring example using the KW 1000

Open circuit voltage setting at the EFT generator (50ohm output): 2,000V

Resulting output voltage across the 1,000ohm matching resistor: 1,905V

Measuring voltage Vm: 4V

Measured voltage considering the 50ohm input impedance of the oscilloscope: 2V

Resulting attenuation (theoretical): 1,000:1