• Inquiry(0)

    • PPST

    • ACX Series – AC Power Source ACX Series

    ACX Series – AC Power Source

    Power conversion is achieved by high frequency pulse width modulation, resulting in cool, quiet and efficient operation. The ACX Series is ideal for AC test, frequency conversion, laboratory and bench-power applications. Equipped with the UPC-1 programmable controller, the ACX becomes a powerful AC Power Source and Power Analyzer for today’s testing needs.
    Model : ACX Series
    Power conversion is achieved by high frequency pulse width modulation, resulting in cool, quiet and efficient operation. The ACX Series is ideal for AC test, frequency conversion, laboratory and bench-power applications. Equipped with the UPC-1 programmable controller, the ACX becomes a powerful AC Power Source and Power Analyzer for today’s testing needs.


    Power Source Specifications
    Output Power:
    110ACX-UPC1: 1000 VA
    115ACX-UPC1: 1500 VA
    118ACX-UPC1: 1800 VA

    Output Frequency:
    15 to 1,200Hz Full Power

    Ripple and Noise:
    -66dB
    Line Regulation:
    0.1% Max ± 10% line change

    Load Regulation:
    1.5% 15 to 200Hz – 2.0% 200 to 800Hz – 3.5% 800 to 1,200 Hz. Improves to less than 0.1% with external sense and CSC enabled
    Output Distortion:
    0.25% THDAVG 15 to 200Hz
    0.50% THDAVG 200 to 800Hz
    1.00% THDAVG 800 to 1200Hz
    (Under full resistive load)

    Response Time:
    80 microseconds typical, 10-90% load step
    Mechanical Specifications
    Dimensions:
    3.5″/88mm x 16.75″/426mm x 23.62″/600mm (excluding rack kit and TB cover)
    Weight:
    40lbs/18.2kg
    Cooling:
    Side intake with rear exhaust
    Input Connection:
    Compression terminals with strain relief. Optional power cables available.
    UPC Series Controller Specifications
    Frequency:
    Range: 15 to 1200 Hz
    Resolution: 4 significant digits, e.g. 50.00, 400.0
    Accuracy: ± 0.01%, 15 to 1200 Hz

    Voltage:
    Range:0 to Vmax
    Resolution: 0.1 Vac steps
    Accuracy:± 0.2% of range + Cal. ref.
    Current Limit:
    Range: 0 to 50Apeak Max
    Resolution:± 0.05%
    Accuracy:±3%, FS

    Waveform Library:
    The UPC programmable controller contains waveform libraries which store 22 executable waveforms in Non-Volatile RAM. Waveforms are editable via the front panel, bus command or using the software UPC Studio.
    Power:
    Measures True Power (kW), Apparent Power (kVA) and power factor. Range: Based on ammeter. Resolution: 1.0 watts or VA to front panel, 1.0 watts or VA to remote interface.

    Power Factor:
    Calculated and displayed to three significant digits.
    Expanding the AC Power Source into an Automated Test System
    Pacific’s line of Smartsource® AC Power Sources enable engineers to easily automate their testing by using UPC Interactive LabVIEW. An extensive list of Virtual Instruments (VIs) are offered for Pacific’s ACX Series Power Sources.


    Key Features Provide Application Versatility
    Universal (115-240V, 1Ø, 50/60Hz.)
    PFC input with inrush current limiting.
    Single Phase, Dual range; 0-150V/0-300V output
    15 to 1,200Hz. full power operation
    5,000 Hz small signal bandwidth
    10A universal output receptacle
    Adjustable Current Limit
    Adjustable Current Protect
    Keyboard Lockout
    Remote output relay interlock
    Transient/Waveform simulation
    99 steady-state programs with associated transients for static and dynamic test applications
    True-RMS metering of volts, amps, and power
    Complies with:
    CSA C22.2 No. 61010-1
    UL 61010-1
    EN 61010-1
    EN 61326-1
    UPC Manager Software Suite
    Regulatory Markings: NEMKO, CE, NTRL-CCL


    AC Test Power
    The ACX Series Power Source uses the same advanced fully programmable controller as higher power and larger AC power sources available from Pacific Power Source. It constitutes a fully integrated AC power generation and measurement analysis test system that can eliminate the need for additional measurement equipment such as DMM’s or power analyzers, saving both cost, rack space and integration time. With its wide 15Hz to 1200Hz output frequency range and dual voltage range to 300VAC rms, it can generate a wide range of simple to complex AC output sequences to a unit under test.
     Frequency/Voltage Conversion
    Due to its compact size and higher current output capability, the ACX’s are excellent sources of stable AC voltage over the frequency range of 15 to 1,200 Hz. The output frequency is quartz-crystal stabilized. Output voltages up to 300 VAC are provided. Bench use as an easy to use frequency converter in a lab environment is facilitated by its front panel universal output socket and simple to operate front panel with 4 line backlit LCD display.
    ATE Applications
    With its compact form factor requiring only 2U (3.5”) rack space and its high power density, the ACX is ideally suited for a wide range of automated test systems that require precision AC power output to the unit under test. Using the same bus command syntax and instrument drivers as the widely used ASX and AMX Series power source, the ACX Series uses the same instrument drivers and can be integrated quickly. The universal AC input allows test stations equipped with ACX units to be deployed anywhere in the world.
    ACX Controller Applications
    The ACX-Series uses the same UPC-1 single phase controller as used on the broad range of ASX Series models and as such is fully software compatible with entire line of Pacific Power Source products. The same unit can be used in manual control mode from the front panel or remotely using standard RS232 interface or optional GPIB.


    This site uses cookies to collect the necessary user browsing behavior so that we can provide you with a better browsing experience. Browse this site, which means you agree with "online privacy declaration."